Showing posts with label roomba. Show all posts
Showing posts with label roomba. Show all posts

Wednesday, June 17, 2020

Curtains! Bins! Floors! WFH! Oh My!

I think I have two curtains in my whole house, and one of them covers the door in the studio. I don't need folks peeking into my house, so I put a curtain there.

Those red things are tomato pincushions. The fabric is appropriate, except when I take a picture of anything on my design wall the curtain is distracting, so I have to crop it out. I thought I would make a curtain that was light, creamy and would disappear. I actually did some shopping online, but never got very far. 

In my cleaning I found this, a curtain I had used in the last place I lived. I thought it might work, so I hung it up, and OMG I thought it was the ugliest, plainest, most boring thing I had ever seen. So I took it down and looked over at my stash. CLEARLY I didn't want beige or cream, but I also didn't want anything really really busy.

This is part of a line of fabric I fell in love with, and bought lots of. This is why I generally do not buy fabric I fall in love with. Because I never cut into it and it ends up being a waste of money. I might have had some vague plans for this but they never came to fruition. I think this will make a perfect curtain for the door. It will give me some privacy and it isn't too busy.  Over the next few days or so, I will make the curtain. You know, eventually.


In yesterday's post, you may have noticed that the floor in front of the fabric bookshelf was clear of piles of fabric.

That is because I made an Executive Decision. I decided that it would take me WAY TOO LONG to sort through all that stuff and that I would lose my mind and my patience before I got to the end of it. Most of it is too big for the scrap bins, and too small to fold properly and store in the shelves above.

The bin on the top is full of all the leftover striped triangles from the Zebra quilts, along with all the scraps and strips from making them. The bin in the bottom is full of all the bits that were lying on the floor and cluttering up my cutting table. Now that it has been confined to one bin, I can sit down some day and sort through it and decide if it is worth keeping or not.

The big bin on the top of the bookshelf is all the leftover backing fabric from the quilts I have had quilted. (Yes, I am well aware that is not the best place for it, but storage is at a premium in this house, so this is where it will stay.) That stuff is long pieces of odd sizes that are hard to fold. There's all kinds of good stuff up there.


I got home last night and washed the last two windows, and the shelf, and then cleared the room of everything I could. I even moved the kitty condo. I got everything up off the floor, and let the Roomba (the REAL Roomba) do its thing. Then I put everything back.

NOW, it's clean. I have some backing fabrics I have to iron and get ready for their quilts. I have some other fabric that was draped over an armchair in my living room that needs to get ironed and put away properly. I have to organize the fabric in the bookshelf stash. I have a few other smallish things to do, but now I have room to do them and I won't feel angry or irritated every time I walk into the studio.

In other words, I can relax. I will give you the full tour tomorrow.

Thank you JustGail for complimenting me on showing my messy studio. Except I didn't. I did a lot of picking up and putting away before I took that before picture. It was much worse, and I was very embarrassed.

But I just had to prioritize. I had had readers begging for the Zebra tutorial, and I had some nagging issues I had to resolve before I could write it.

I can count on the fingers of one hand the number of negative reviews my tutes have received, and those are mostly because they did not read the description that said "these are not paper pieced." It's very important to me that whoever buys one of my tutes has all the information they need to make whatever I am teaching successfully. It takes a TREMENDOUS amount of work, and I had to keep figuring out how to get those great big striped triangles to fit together perfectly no matter who made them. So it was work on figuring that out, and the hell with the way the studio looked. Now that the studio is clean I can move on.

Note I did not say "back to normal." "Normal" for my studio would be somewhat messy, indicating creative work is being done.


One final note. I have been WFH - working from home - since mid March. I learned today I will be continuing to do so for at least another couple of months. In the CEO's words to me in an email I received a few hours ago "...we are being super careful and cautious about looking at everyone individually - health risk wise, extended family situation, particular role you are playing - and creating very tailored solutions on how we run the business and attempt to keep everyone safe. Sounds simple, but clearly not easy. But well worth it, it is the only way to do it."

And folks ask me why I have stayed with this company more than 30 years.



Wednesday, February 19, 2020

Roomba Redux

 
 So yesterday Margie asked me about the Roomba.

About two years ago I decided to get a robotic vacuum cleaner. I searched Amazon, and read all the reviews. I bought their recommended model a Deebot. I paid $199 for it.

So here's the thing. You have to really THINK about what you want. I live on one floor. I have linoleum and wall to wall carpeting. I have a cat. I do not have throw rugs with fringe or tassels. I don't have a lot of electrical cords that a robotic vacuum cleaner can get stuck on.

I bought the Deebot and loved it. Thing was, when I got it it would run for about 90 minutes, and it moved around randomly, with no set pattern I could discern. I could set it to run, and it did, and when it ran out of juice it would find it's charging station and that was that. The longer I had it though, the less it ran, until after I'd had it a year it would only run for 45 minutes, and it wasn't enough time to clean the whole house.

There were some nice features, however. It had a "spot clean" which means I could set it on a particularly messy spot and it would go round and round in ever increasing circles until it had cleaned everything that was there, and then it would stop. I could tell it to clean one room. I could tell it to do the edges of a room. It had a remote, and I could run it from an app on my phone. It had a good sized bin, so I didn't really empty it more than once a week.

The Deebot also let me know if the "consumables" (brushes and pickup rollers) needed to be replaced, so I could check at a glance. (The Roomba expects me to know that on my own.) The Deebot also had a hard time finding the charging station when it ran out of juice. It could wander around the house for a half an hour until it "found mommy." (The Roomba knows EXACTLY where to find it, and it's rather amusing to watch it navigate its way around the house to get there.)

But like I said, the Deebot was running less and less, and wouldn't clean the whole house in one pass. I had to build a physical barrier to keep it from getting stuck under the front edge of the dishwasher, and it would get hung up near Millie's litter box, and I had to set another physical barrier to keep it out of my sewing studio (because there was a slight drop down in floor level, and while it could go DOWN, it could not make it back UP without getting stuck, and I didn't want it running in there on its own anyway. These barriers were not good. I and my guests often tripped over them. I'm 65 and I already have osteoporosis. A fall is not what I need.

The Roomba was a lot more expensive, well over $500, and while it won't run more than 45 minutes or so, when it runs out of juice, it goes back to the charging station to get charged up, then it continues the job. It does that as many times as it has to to clean my whole house. (For the record, I have it scheduled to start every day at 9 AM, and I get a text message about noon that it has completed the job. I know it charges twice.) The bin is a bit smaller, so every day after I hang up my coat, I empty the bin. (the Roomba lives next to the coat closet.) No big deal.

The Roomba, however, is a robot at heart. It vacuums in a back and forth motion, going from one end of the room to the other, then shifts to the side, and does it again. So it ABSOLUTELY covers everything. My house always looks good. I trust it so much I don't even bother to clean the food debris off my kitchen counters very thoroughly, I just brush them on the floor. The Roomba will pick it all up. (Yeah, I know.)

At the end of every job, the Roomba sends me a map of the job. Trust me when I tell you, it goes EVERYWHERE. My house is always, divinely clean, and there is always stuff to empty. It really is great.


The Roomba came with a gizmo that is a "virtual barrier." I bought second one. The first prevents it from going into the studio. The second keeps it away from Millie's litter box (like in the picture above.)

Millie's food dishes proved to be a different problem. Having used the two virtual barriers already, I would have had to buy a third (and they are not cheap - about $30 - $45 each) to keep the Roomba from knocking her food bowl over. I had tried putting her food in a tray, but both robots climbed right over the edge, and got stuck. I didn't want to use a barrier anyway, I wanted the Roomba to pick up the dried bits Millie left around.

The solution turned out to be elegantly simple - get something to keep her food dishes higher than the Roomba. Sure I could have bought a lot of useful, cheap, ugly things, but this one was good looking. Millie already has a water fountain that she loves, so I don't need to keep one of these bowls filled with water. She's a messy eater. Every other day or so I clean it off, but the Roomba doesn't spill the food so I'm good with it.

One other thing: I inherited my grandmother's Duncan Phyffe banquet-sized, drop leaf Mahogany dining room table (It opens to almost 12 feet long by almost 48" wide). It has these curved legs. The Deebot would regularly get stuck on one. It was like it was trying to hump it, and of course it would get stuck. At least once a week I'd get home and find it stuck under there. The Roomba never gets stuck that way.

I have cord covers for electrical cords that have to lie on the floor for some distance before they get to an outlet, but that was an easy fix. I use my laptop on my dining room table, and the cord lies on the floor. So instead of leaving it on the table when I am gone, I move it to the kitchen counter, and loop the extra cable around it, so the cord isn't resting on the floor. This way the Roomba doesn't catch the cord and pull it down.

I put the DeeBot in the studio. When I am ready for a good clean in there, I make sure nothing is on the design wall (because it would blow the stuff off) and pick up the cords and all the large scraps of fabric that might be on the floor. Then I turn it on and let it go to work. Works fine.

Millie is no longer afraid of either one. She will NOT sit on it, and gives them the evil eye when they go past her, but they can't get into her napping spots, so she's happy.

I'm amazed at the stuff they pick up. Pins, push pins, stray needles, fabric scraps, buttons, onion skins, peppercorns, cat hair, along with all the other dust and stuff. No they are not good at getting anything sticky or wet, and if I find a dried up hairball stuck to the carpet, it's me that's got to get it loose so the vacuum will pick up the debris, but seriously, that isn't often.

Like I said the first two times, I don't know why everybody DOESN'T have these. My house always looks good, and I am not stuck doing the work.

So if you're interested, figure out what you need and do your research. I've included the links to my original posts about each device below. Please also read the comments on each.



Here's my original post about the "Real Roomba".

Here's the original post about the DeeBot.

Thursday, August 15, 2019

The Real Roomba

For my birthday, I bought myself a Roomba. A real Roomba.

Two years ago I had bought a knock-off. A DeeBot, for less than $200. I had read all the reviews, and it's still Amazon's top pick. When it was new it ran for about an hour and a half. It went all over the place in a random fashion, and the house always looked pretty good. I scheduled it to run once a day, and it did that without any problems.


Well. None of these devices like getting stuck, or running over cords, and then don't like level changes. There's a drop down between the studio and the rest of the house, and although the Deebot could get INTO the studio, it couldn't get OUT, or back to its charging station. I didn't want it sucking up stray bits of fabric on the floor, or blowing things off the design wall, so I blocked off the studio the best way I knew how - with a roll of wrapping paper jammed in front of the door. I knew it was there, but visitors often tripped over it.

 And it pushed Millie's food bowls all over the place. I tried putting her bowls in a quarter sheet pan, but that didn't stop the Deebot from running up over the edge and getting stuck. Eventually I put the food dishes in the office and blocked that room with a roll of wrapping paper on the floor too.

Over time, the Deebot ran less and less, and this spring it dropped down to 45 minutes a run, which wasn't enough to get the whole house clean on one charge. By June it was running even less than that.

So I did some research. I could get a Roomba that would map the house as it vacuumed. It would only run for 45 minutes, but when the battery ran down, it would go charge itself and then finish the job. It would also show me a map of what it cleaned, which I thought was pretty neat. Of course, it was 3 times the cost of the DeeBot, but the Deebot wasn't getting the job done.

I was able to get a special price on the Roomba, so I ordered it, and when it came in I set it up and let it go. It's a bit taller and slightly noisier than the Deebot, and when it cleans, it is NOT random. It goes back and forth in straight lines, covering every place it can reach.

The Roomba came with one of these Virtual Wall Barriers. I put it near the entrance to the studio, and it emits an invisible barrier the Roomba won't cross. So no more wrapping paper. I've ordered another one to keep it away from the front of the litter box (long story, don't ask. It's a Millie thing.)

And about Millie's food bowls...

The Roomba can't get on top of this, so it just goes around it.

So how does it CLEAN?

I set the thing to start after I leave for work so I don't have to be around when it vacuums. I get an alert every day after the Roomba has finished a job - and it does indeed map my house. It takes 2-1/2 hours to do the whole thing, and WOW, does it clean. I can feel the difference when I walk around barefoot in the kitchen, and even on the carpets. The Deebot used to push onion skins around instead of picking them up (it has only one brush underneath), but the Roomba sucks them right up (it has two brushes that push things to the middle.)

I've set up the Deebot in the studio, and I'll run it when I need it, so it will all work very well.

Seriously, I tell folks I have these and they ask, "Do those things really work?" Heck yes, they work. And then they say, "Oh but they are so expensive." Well, not really. (How much is your time worth? $20 an hour? If it takes you an hour to vacuum your house every week, a Deebot will pay for itself in 10 weeks....) Think about it. I haven't had to vacuum my house in almost two years. The house always looks good and - I - don't have to do any work, and that, folks, is a WIN!




PS, if you've read this far, please read the comments too.