The Design Wall Limitations

The design wall in my studio is 64" wide by 83" tall. When I show you photos of what's on it, I generally crop out the floor, and extra stuff around the design wall, like the door at left, the wall of the bookcase at the right (that's a long green cutting mat that hangs on the side of the bookcase) and the area above the design wall.

I also try to straighten the photo. This one, above, is a bit crooked. And I usually move the stepladder out of the way.

BTW, Thank you all for caring so much about my safety. I do indeed have to be very careful with the ladder. I have osteoporosis and arthritis and at my age balance is definitely an issue. It's why I am taking Tai Ji Quan, for better balance. It's not the "normal" Tai Chi. It's is designed for better balance. My Mom asked me the other day if I noticed any changes in my body seven weeks into the class.

"Well, my body hasn't changed. I haven't lost weight and I'm not any thinner, but the other day I put a sock on one foot while standing on the other, and no, I wasn't holding on to anything." Granted I was right next to the bed, but still. And it's only one foot. I can't do that quite as well on the other foot, but I'm better.) A few months ago I would never have even TRIED to balance on one foot. So the Tai Ji Quan class is working for me, although the change is gradual. But I am not going to risk anything on the ladder.

The Pastel Macnas quilt uses blocks that are 2-1/2" x 4-1/2". My design requires 30 of them in each row.

30 x 2.5" = 75”. Note my design wall is 64" wide, so I could only show 25 blocks across, like in the photo above. I needed to sew a lot of blocks together to make room for the extra five blocks to fit on the design wall.

Sewn together, those 30 blocks equal 60.5", which will fit just fine.

But trying to tinker with that many blocks while on a ladder is indeed foolhardy, which is why I have not bothered to fill the design wall with blocks. I'm working as high as I can comfortably reach while standing safely on the floor. Then I'll sew that all up and move it higher on the design wall and work below it.

In the photo above, you can see sorta how I'm working my way along. I've also been working to sew blocks together so I can have enough empty space on the right side to continue to add those five extra blocks to the design.

Is this ideal? Hell no. But needs must.

The size of the blocks definitely makes a difference. In the Dancing Jewels quilt, above, the top row of blocks is eight inches tall, most of the blocks are six inches wide and there are only 10 blocks in each row.

There are tricks. You might be able to see a thin sliver of silver on the green cutting mat in the photos above. That's a thin 24" long metal ruler that hangs on the same nail the long mat hangs on. If I want to remove a high block from the design wall, I just grab the ruler and slide it under the block. This disturbs the surface tension and the block loosens from the wall and flutters down to my feet. (It would be nice if I could catch them, but no such luck.) 

I also know better than to go anywhere near the stepladder when I'm tired.

Finally, Nancy: I used to be a 2D artist and I worked on paper. That means I'd put hundreds of hours into a piece of art on paper, (see the first photo in this post. )so I long ago learned to keep foods or liquids of any kind FAR AWAY from what I was working on. My cup of hot chocolate NEVER sits on my sewing, cutting, or ironing tables. I don't eat in my studio either. Snacking is also forbidden. In fact, I make sure to wash my hands BEFORE I got into the studio and get to work.