
I've told you already how much I love bags, boxes and other types of containers. I decided to make a longer variation of
this little bag. I had an idea of the size, but I'm not always good with numbers, so I decided to do a "mock up." But I always use fairly decent fabric in case the mock up turns out OK.

Fortunately, I caught this mistake, above, before I started stitching. Those little loops would have been useless on the -inside- the bag.

This is the end.

This is the inside.

This is what I made the bag to hold.
This little bag is 7-3/4" long by 1" wide by 2" tall. It's okay, but could be a bit longer and wider.
Also, I used plastic tablecloth material for the lining, since toothbrushes usually get wet. It was a good idea, and will also provide some stiffness, but sewing with it demands a few adaptations.
For one thing, you poke a hole in this stuff with a pin, and the hole stays. So when I added the zipper, I held it in place with
blue plastic painter's tape. (Last time I was at the hardware store I bought a roll 3/4" wide.)
Next, it doesn't want to slide under the presser foot of the sewing machine, so I used a small piece of tissue paper underneath, then just tore it off once I sewed a seam.
I'll also do the zipper a bit differently. I don't like seeing the white of the lining near the zipper.
The green fabric on the inside bottom of the bag covers the seam and also provides a bit of stiffness. I like that.
I think the next one will be better, and I can already envision little bags like these in fun color combinations stuffing Christmas stockings later this year.
I can picture one in selvages, too!